Vibe FWD L4-1.8L VIN L (2005)
Housing Assembly HVAC: Service and Repair
HVAC MODULE ASSEMBLY REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Discharge and recover the Refrigerant. Refer to Refrigerant Recovery and Recharging.
3. Drain the engine cooling system. Refer to Draining and Filling Cooling System in Cooling System.
4. Remove the heater hoses (2, 3) at the heater core.
IMPORTANT: Cap the open fittings in order to prevent dirt and moisture from entering the refrigeration system.
5. Remove the evaporator inlet (4) and outlet (3) tubes from the evaporator.
6. Remove the instrument panel assembly.
7. Remove the instrument panel reinforcement.