Vibe FWD L4-1.8L VIN L (2005)
3. Position the seat to the most rearward position.
4. Connect the cellular antenna and the navigation radio antenna connectors (1).
5. Connect two vehicle communication interface module electrical connectors (1).
6. Connect the battery ground cable.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
7. Reconfigure the OnStar(R) system. Refer to Communication Interface Module (OnStar) Programming and Setup in Programming and Setup. See:
Testing and Inspection/Programming and Relearning
IMPORTANT: If replacing the vehicle communication interface module, you must reconfigure the OnStar(R) system.
