Vibe FWD L4-1.8L VIN L (2005)
Windshield Washer Spray Nozzle: Service and Repair
Washer Nozzle Replacement
WASHER NOZZLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the 2 lower plastic retainers which secure the hood insulator. Fold back the bottom of the hood insulator (4) in order to gain access to the
windshield washer nozzle hose (1) and the rear of the windshield washer nozzle (2).
2. Remove the hose (1) from the nozzle (2).
3. Press together the nozzle retaining tabs and remove the nozzle (1) from the hood (2).
INSTALLATION PROCEDURE
1. Install the nozzle (1) to the hood (2). Ensure that the retaining tabs are fully engaged.
2. Install the hose (1) to the nozzle (2).
3. Reposition the hood insulator (4) back to its original position. Secure the insulator with the 2 plastic retainers.