Vibe FWD L4-2.4L (2009)
Antenna Mast: Service and Repair
Fixed Antenna Mast Replacement
Removal Procedure
Caution: Use tape on the tool surface so that you do not damage the paint on the antenna mast.
1. Unscrew the antenna mast.
2. Remove the antenna mast from the antenna base.
Installation Procedure
Caution: Use tape on the tool surface so that you do not damage the paint on the antenna mast.
1. Install the antenna mast to the antenna base.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Secure the antenna mast to the antenna base.
Tighten the antenna mast to 5.5 Nm (49 lb in).
