Fluid - Differential: Service and Repair
- Make
- Pontiac
- Model
- Vibe FWD
- Engine
- L4-2.4L
- Year
- 2009
- Section
- Fluids › Fluid - Differential › Service and Repair
MaintenanceService and Repair · page 1 of 2
Fluid - Differential: Service and Repair
Axle Lubricant Change
Removal Procedure
1. Using a hexagon wrench (10 mm), remove the differential cover plug (1) and gasket.
2. Using a hexagon wrench (10 mm), remove the differential drain plug and gasket, then drain the oil.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Using a hexagon wrench (10 mm), install the differential drain plug with a new gasket and tighten to 39 Nm (29 lb ft).
2. Add oil.
3. Check the oil level.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2009 Pontiac Vibe 2.4L
- PARTOil filterSearch: Pontiac Vibe 2009 2.4L oil filter
- TOOLOil filter wrenchSearch: oil filter wrench
- FLUIDEngine oilSearch: Pontiac Vibe engine oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.