Vibe FWD L4-2.4L (2009)
4. Remove the Theft Deterrent Exciter Module (4).
*
Disconnect the module connector (1).
*
Disconnect the wire harness fastener (2).
*
Remove the bolt (3).
Installation Procedure
1. Install the Theft Deterrent Exciter Module (4).
*
Install the bolt (3).
*
Connect the wire harness fastener (2).
*
Connect the module connector (1).
2. Install the HVAC Module (2). Refer to Air Conditioning and Heater Module Assembly Replacement (See: Heating and Air
Conditioning/Housing Assembly HVAC/Service and Repair/Air Conditioning and Heater Module Assembly Replacement).
3. Install the lower instrument panel. Refer to Instrument Panel Lower Trim Panel Replacement (See: Body and Frame/Interior Moulding /