911 Carrera (997) F6-3.6L (2006)
Secure insert for locking mechanism with the screw --> Figure 10 -A-.
4. Fit center console. --> Workshop Manual '681719 Removing and installing center console'
4.1 Tighten the screws --> Figure 11 -A-.
NOTE:
Continue to use the standard center console floor.
4.2 Fit center console floor and tighten the screw --> Figure 12 -A- on the center console floor.
5. Install console.
5.1 Connect connector --> Figure 13 -A- to the console and fit wire harness (retrofit kit) --> Figure 13 -C- in the locking lugs (cable guide) -->
Figure 13 -B- on the console.
ATTENTION
Incorrect installation of console
-
Risk of surface damage (Standard, Leather or Carbon Look)
--> Carefully pull the center console apart in the area indicated by arrows (Figure 14) with the help of a second person.