porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 5073 > < Procedures|Page 5071
Page 4
background image

ATTENTION:

Voltage peaks can damage the audio system.

-

Before unplugging/removing audio components, remove ignition key and switch off audio system.

NOTE:  If the amplifier is to be replaced, the coding must be read out using the PIWIS tester 9718 before removing the amplifier.

NOTE:  The number of plugs can vary, depending on the equipment.

1. Release connector -2 to 4- on loudspeaker amplifier -1- -arrows A- and pull off -arrows B-.

2. Remove the loudspeaker amplifier with holder up and out.

Procedures|Page 5073 > < Procedures|Page 5071