911 Carrera (997) F6-3.6L (2006)
Drink Holders: Overhaul
683037 Disassembling And Assembling Cup Holder
Preliminary work
1. Remove cup holder.
2. Remove moulding for dashboard (cup holder).
Disassembling cup holder
Removing flap
NOTE: The flap can be replaced when the vehicle's cup holder is installed or removed.
1. Open cover -1- in -direction of arrow A-.
2. Open linkage lever -2- in -direction of arrow B-.
NOTE: Make sure that the torsion spring -3- does not jump out of place.
3. Insert a screwdriver between the linkage lever -1- and flap -2-, unclip it in -direction of arrow A- and remove it from the linkage lever -arrow B-.
Assembling cup holder
Installing flap
NOTE: To fit the flap correctly, the torsion spring -3- must be hooked in prior to installation.
1. Position flap -2- on the linkage lever -1- (-arrow A-) and press it in -direction of arrow B- until it locks with an audible click.