911 Carrera (997) F6-3.6L (2006)
Installing collar of opening for belt
5. Position locking tabs of collar of opening for belt -1- on side trim panel and press them in.
Aligning seal
6. Lift up the pillar seal -1- using a plastic spatula -2- along the side trim panel -3-.
7. Fold up rear backrest and lock it.
Subsequent work
1. Install back seat cushion.
2. Install B-pillar trim.
Removing and Installing Front Luggage Compartment Trim Panel
700519 Removing And Installing Front Luggage Compartment Trim Panel
Removing front luggage compartment trim panel
Removing front luggage compartment trim panel (luggage compartment pan)
NOTE: Only for USA/Canada version vehicles.
1. Remove front emergency release.
2. Release twist locks -1-, open up tool box -2- and remove it in an upward direction.