911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-1087004.png)
5. Unscrew fastening nut -1- from the inside and remove base plate -2- from roof channel.
6. Remove residual adhesive -3- and clean contact surface of base plate -2-.
Installing base plate of Roof Transport System
INFORMATION: Contact surface of roof channel and base plate of Roof Transport System must be free of dirt and grease.
1. Apply adhesive -3-, SEALING MATERIAL on the underside of the base plate -2-.
2. Position base plate -2- of Roof Transport System in and parallel to the roof channel. Screw in fastening nut -1- from inside and tighten. Tightening
torque: 23 Nm (17 ftlb.)
