911 Carrera (997) F6-3.6L (2006)
NOTE: The inner panels must be removed or replaced if the sliding roof panel and slide/tilt sunroof trim is removed and the gate of the roof frame is
extended (tilting position).
Installing inner panel
1. Press the sides of the inner panel into the sliding roof frame. Check function by sliding longitudinally.
Installing slide/tilt sunroof trim
Installation position for slide/tilt sunroof trim
Installing slide/tilt sunroof trim
1. Pull out the connector springs -A- on the gate and push in slide/tilt sunroof trim. Push inner panels under the sheetmetal panel of the slide/tilt
sunroof trim.
Positioning slide/tilt sunroof trim