911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-1108005.png)
1. Connect the removed seat to the vehicle's wiring harness via test cable 9745 and test cable 9745/1.
2. Connect electric plug to control module trim panel.
3. Connect the battery.
4. Switch on ignition.
5. Carry out a function check on the seat components.
6. Switch off ignition after function test and disconnect battery.
7. Disconnect test cable 9745 and test cable 9745/1.
Subsequent work
1. Install cover for left backrest.
2. Install padding for front backrest.
