911 Carrera (997) F6-3.6L (2006)
4. Fold the air cushion for the seat -1- aside -Arrow A- and unscrew the two fastening screws -2- on the air cushion support plate -3-.
5. Take air cushion support plate -3- off -Arrow B-
6. Push the pins -2- of the two expanding clips -1- back ( -Arrow A- ) and remove the expanding clips -1- -Arrows B-.
7. Remove air cushion for seat ( -3- ).
Installing air cushion for seat
1. Position air cushion for seat -3- on the air cushion support plate -Arrow A-.
NOTE: The air cushion for the seat is fastened only with the rear air cushion on the air cushion support plate.
2. Secure the air cushion for the seat -3-. Use the two expanding clips -1- to fasten -Arrows B- it. To do this, the pins -2- must be forced into the