911 Carrera (997) F6-3.6L (2006)
Brake fluid level
Bedding in the brake pads
New brake pads require a slightly longer bedding-in period for PCCB brake discs than cast iron brake discs.
In general, the following applies: New brake pads must be worn in (bedding-in period), their optimum braking effect is not reached until after a few
hundred kilometers. The slightly reduced braking effect must be compensated for by increased pressure on the brake pedal. The same also applies
after changing brake discs.
Subsequent work
Fit wheel.
Removing and Installing Rear Brake Pads
Removing and installing rear brake pads
Preliminary work
Remove wheel.
Removing rear brake pads
Removing rear brake pads - C2S/C4S as of MY 2005
1. Take off the securing clip and remove the retaining pin by pulling it inwards. -arrows-