911 Carrera (997) F6-3.6L (2006)
10. Connect two cable plugs to the oil temperature switch for cylinder bank - 6.
Removing
Removing camshaft - engine removed
Camshaft designation M96/05
Note: Between the start of series production in April 2004 and August 2004, the camshaft manufacturer changed the lettering of the camshafts. In
order to avoid a mixed installation, particular attention must be paid to the designation of engines installed in standard vehicles during this period.
Position of lettering: -arrows-
Camshafts for cylinders 1 - 3
^
Inlet camshaft 261.08 3,6 IN 1-3
^
Exhaust camshaft: 262.05 3,6 EX 1-3
^
Inlet camshaft (new): 996.105.047.02/03 3,6 IN 1-3
^
Exhaust camshaft (new): 996.105.059.01 3,6 EX 1-3
Camshafts for cylinders 4 -6:
^
Inlet camshaft: 263.08 3,6 IN 4-6
^
Exhaust camshaft: 264.05 3,6 EX 4-6 (with aluminum plugs)
^
Inlet camshaft (new): 996.105.048.02/03 3,6 IN 4-6
^
Exhaust camshaft (new): 997.105.060.01 3,6 EX 4-6 (with aluminum plugs)
Additional identifying feature for exhaust camshaft 4 - 6: aluminum plugs with lubrication bore for tandem pump
Camshaft designation M97/01
Note: Between the start of series production in April 2004 and August 2004, the camshaft manufacturer changed the lettering of the camshafts. In
order to avoid a mixed installation, particular attention must be paid to the designation of engines installed in standard vehicles during this period.