911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-290006.png)
15. Install cover plate, position and tighten two M6 x 16 Torx screws. Tightening Torque: 7.5 ft. lb.
Cylinder side 4-6:
16. Connect the two cable plugs on the oil temperature switch.
17. Fasten ground cable on cylinder head with M8 Torx screw. Tightening Torque: 17 ft. lb.
Subsequent work after installing cylinder head cover
Touch up for installing cylinder head cover
1. Fit rear mufflers.
2. Install engine.
