911 Carrera (997) F6-3.6L (2006)
3. Fit sealing ring with the insertion device of the assembly sleeve 9610/1.
4. Check that the sealing ring is seated correctly. To do this, measure at four points, offset by 90°, from the belt pulley attachment surface on the
crankshaft flange to the sealing ring (outer radius). Dimension: 14.5 mm
Subsequent work for crankshaft sealing ring - belt pulley side
1. Install belt pulley or vibration damper.
2. Position and tension drive belt.
3. Install air cleaner housing.