911 Carrera (997) F6-3.6L (2006)
Refrigerant Temperature Sensor: Service and Repair
875819 Removing And Installing Temperature Sensor
Removing temperature sensor
Installation position
1. Switch off ignition and remove ignition key.
Releasing electrical connector
2. From the driver's side, reach around to the "driver's footwell" air vent to release and disconnect the electrical connector -a-.
Removing temperature sensor
3. Turn temperature sensor through 90° and pull it out of the heating/air conditioner unit.
Installing temperature sensor
1. Switch off ignition and remove ignition key.
Installing temperature sensor
2. From the driver's side, reach around the "driver's footwell" air vent to insert the temperature sensor into the heater/air-conditioning unit and turn it
through 90°.