911 Carrera (997) F6-3.6L (2006)
Ambient Temperature Sensor / Switch HVAC: Procedures
875919 Removing And Installing Outside Temperature Sensor
Removing outside temperature sensor
Installation position
1. Switch off ignition and remove ignition key.
Unplugging electrical connector
2. Release electrical connector to the temperature sensor -a- and unplug it.
Removing temperature sensor
3. Turn temperature sensor through 90° and pull it out of the heating/fresh-air unit.
Installing outside temperature sensor
1. Switch off ignition and remove ignition key.
Installing temperature sensor
2. Insert temperature sensor into the heating/fresh air unit and turn through 90°.