911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-1152001.png)
Driver/Vehicle Information Display: Service and Repair
Removing and Installing PCM Display and Control Unit
Removing And Installing PCM Display And Control Unit
Tools
Preliminary work
Preliminary work for PCM display and operator control unit
Remove both covers on centre console.
Removing PCM display and control unit
Removing display for the PCM operator control unit
Switch off ignition and remove ignition key.
1. Loosen the side fastening screw a few turns.
2. Insert a hexagon-socket wrench sideways into the screw connection of the PCM detent hooks.
