911 Carrera (997) F6-3.6L (2006)
3. Unscrew the two fastening screws -1-.
4. The instrument cluster is also secured in the dashboard with two retaining clips. Therefore, pull the instrument cluster abruptly forward and if
necessary push instrument cluster away from dashboard from underneath.
5. Release electrical connector on instrument cluster -A- and unplug it.
6. Pull out instrument cluster at the sides and to the left.
Installing instrument cluster
1. Position the instrument cluster, connect the electrical plug and lock.
2. The instrument cluster has two retaining clips; push instrument cluster into the dashboard and press on until the retaining clips engage.
3. Screw down instrument cluster with both fastening screws -1-. - 4.2x16-C: 2.3 Nm (2.0 ftlb.)
4. If a new instrument cluster was installed.
Subsequent work
Reworking instrument cluster
Install top steering-column panel.
Programming instrument cluster
Reading and printing values
INFORMATION:
-
If the instrument cluster is replaced or exchanged, the instrument cluster must be programmed and coded using the PIWIS Tester 9718. This is