911 Carrera (997) F6-3.6L (2006)
Headlamp Cover: Service and Repair
941419 Removing And Installing Headlight Mounting
Preliminary work
Preliminary work - headlight mounts
Remove the headlights.
Remove the front spoiler.
Remove front wheel housing liner.
Removing headlight mounting
NOTE:
-
The main headlights are fitted into the body at the factory.
-
A new adjustment may only be made in the case of accident repairs or replacement of the main headlights.
-
The headlight mount is secured to the body by 3 knurled nuts.
Adjusting element
1. Unscrew the 3 knurled nuts from the adjusting elements.
Mount installation
2. Pull mount forwards out of the body.
Installing headlight mounting
NOTE:
-
The main headlights are fitted into the body at the factory.
-
A new adjustment may only be made in the case of accident repairs or replacement of the main headlights.
-
The headlight mount is secured to the body by 3 knurled nuts.
1. Push the mount into the body and screw down with three knurled nuts.
Tightening torque 6 ftlb. ± 1.5 ftlb.
Adjusting element
2. Check that the gaps match the specified gap dimensions. Adjust the headlight mount if necessary.