911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-1211004.png)
Subsequent work - servo motor for headlight levelling system
NOTE: After reinstallation or installation of a new servo motor for the headlight levelling system, the headlight must be calibrated.
1. Install main headlight.
2. Connect the Porsche System Tester PIWIS Tester 9718 to the vehicle and start the System Tester. Switch on ignition. .>>" to continue.
3. Select front end on the control unit, carry out calibration menu.
4. Check headlight setting and adjust if necessary.
