911 Carrera (997) F6-3.6L (2006)
Coolant: Service and Repair
Draining and Filling In Coolant
Draining and filling in coolant
Tools
Preliminary work
1. Removing rear underside panel.
Cayman only:
2. Remove engine cover.
Draining coolant
Note: In order to facilitate assembly of coolant pipes and hoses smear with Klüber Syntheso Glep or alternatively Klüberplus S06-100 assembly gel
(available from the Porsche Parts catalogue)
Note:
^
Check Henn coupling O-rings and replace if necessary.
^
Clean push-in connector and coolant hoses before assembly.