911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-742127.png)
1. Release the cable retainer -arrow A- and pull off the two connectors -arrow B-.
2. Unscrew the fastening nut and remove the connector socket -arrow C-.
3. Remove the ABS wire harness from the brackets -arrows-.
NOTE: When cutting the ABS wire harness, make sure that there is enough line length left to join to the new lines.
4. Cut off the ABS wire harness around -a- and press inward with the rubber sleeve -b- -arrow-.
