911 Carrera (997) F6-3.6L (2006)
Headlamp Control Module: Procedures
945719 Removing And Installing Control Unit For Gas Discharge
Removing control unit for gas discharge
Removing cap of main headlight
Fastening screws for cap
1. Unscrew four fastening screws -1- from the cap.
Releasing cap
2. Release cap once at the top and twice at the bottom -a- and remove from the main headlight.
Removing control unit for gas discharge
Unscrewing fastening screws and pulling out coil
1. Unscrew the fastening screw -2- for the coil and pull the coil -3- out of the cap.
2. Unscrew the two fastening screws -1- and remove the control unit.
Releasing electrical connector with screwdriver
3. Using a screwdriver, carefully release the electrical connector on the screwdriver and lever it out.
Installing control unit for gas discharge