911 Carrera (997) F6-3.6L (2006)
1. Turn seat central connector -A-at AWS holder to the left and remove from the holder.
2. Unscrew the three fastening screws -1- for the AWS holder on the seat bracket.
3. Release electric connector on AWS control unit -a-, unplug and tilt the AWS holder to the right side.
4. Unscrew the three fastening screws -2- of the AWS control unit and remove the control unit.
Installing AWS control unit
1. Position AWS control unit on the holder and screw it down using the three fastening screws -2-.