911 Carrera (997) F6-3.6L (2006)
4. Using a screwdriver, release the lock for the electric connector -2- on the seat-belt pretensioner in -direction of arrow-.
5. Pull off connector on seat-belt pretensioner -arrow A-.
6. Unscrew fastening screw -arrow B- and remove seat-belt pretensioner.
Installing front three-point belt
INFORMATION:
-
The seat-belt pretensioner may only be installed when the ground terminal of the vehicle battery is disconnected.
-
The vehicle battery may only be re-connected after the re-installation of the belt has been completed.
1. Install seat-belt pretensioner. Observe direction of travel.