911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-715004.png)
5. Release connector housing with a small screwdriver, lift upwards and remove from connector.
6. Lift connector guide and remove from connector.
NOTE: Allocation of lines - see wiring diagram.
7. Release contact of the damaged line using the press-out tool 1575-1P of the press-out and unlocking tools for flat and round plug connections of
all sizes NR.155 -Arrow a- and pull out of the contact strip.
8. Push connector of the new wire harness on the relevant component until it is felt to engage.
