911 Carrera (997) F6-3.6L (2006)
Subsequent work
Install rear apron.
Removing and Installing Wiring Harness For Rear Spoiler
Removing And Installing Wiring Harness For Rear Spoiler
Information
Note on removing and installing wiring harness for rear spoiler
NOTE:
-
The wire harness for rear spoiler is not available as spare part.
-
If the wire harness for the rear spoiler must be replaced, this is only possible together with the spoiler drive.
Replacing Wire Harness For Anti-Lock Brake System (ABS)
Replacing Wire Harness For Anti-Lock Brake System (ABS)
Tools
Preliminary work
Preliminary work on front ABS wire harness
1. Disconnect battery.
2. Remove front wheel housing liner (rear section).
3. Remove plenum panel cover.
Preliminary work on rear ABS wire harness
1. Disconnect battery.
2. Remove wheel.
3. Remove rear backrest.
4. Remove the rear side trim panel.
5. Remove trim panel for seat well.
Removing wire harness for anti-lock brake system (ABS)
Removing front ABS wire harness