911 Carrera (997) F6-3.6L (2006)
Removing and installing drive shaft
Fit drive shafts -1- at the front by screwing in and tightening the screws.
-> Tightening torque: 39 Nm (29 ftlb.)
7. Fit restraining straps on the fuel tank.
Removing and installing restraining straps
Fit restraining straps -1- and screw in and tighten screws -2-.
-> Tightening torque: 23 Nm (17 ftlb.)
8. Install diagonal braces and crash stop.
Diagonal brace
8.1.
Install crash stop -3- (all-wheel drive only).
Fit crash stop -3- and screw in and tighten screws -4-.