911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-797022.png)
2. When replacing the vibration damper, fit a new snap ring -10- using snap-ring pliers VW 161 A - in the relevant groove -A or B- (see allocation in
next table).
Fit bottom concave washer -9- with the groove downwards facing the snap ring -10-. Ensure that the snap ring -10- and concave washer -9- are
seated correctly.
3. Place pre-tensioned coil spring (with the tighter end of the spring) on the vibration damper.
4. Slide the bellows/additional spring assembly onto the piston rod.
5. Fit washer.
