911 Carrera (997) F6-3.6L (2006)
1. Disconnect coolant hoses on ATF cooler using hose clamps 3094.
WARNING: Scalding from hot coolant
^
Let the coolant cool down.
^
Wear personal protective equipment (goggles, gloves)
2. Loosen hose clamps, pull off coolant hoses from ATF cooler and plug the flanges.
3. Unscrew fastening screws -arrows- between ATF cooler and port plate.
WARNING: Danger of scalding and chemical burns from hot ATF
^
Allow ATF to cool down
^
Wear personal protective gear (goggles, gloves)
4. Pull ATF cooler to the rear away from the port plate.
Installing ATF cooler