911 Carrera (997) F6-3.6L (2006)
1. Install cross member -A- and diagonal braces -B-.
2. Fit stabilizer.
3. Bleed the cooling system.
4. Check and if necessary, top up the ATF.
5. Fit the underbody panel.
6. Lower the vehicle.
1. Install cross member -A- and diagonal braces -B-.
2. Fit stabilizer.
3. Bleed the cooling system.
4. Check and if necessary, top up the ATF.
5. Fit the underbody panel.
6. Lower the vehicle.