911 Carrera (997) F6-3.6L (2006)
Clutch Pedal Assembly: Procedures
Removing and installing the clutch pedal
Preliminary work
1. Removing trim panel (lower part of dashboard). To do this, remove the centre console covers Side trim panels, left footwell (centre console)
N681419 Removing and installing centre console cover,s.
2. Unscrew the fastening screws -1- and swivel the trim panel under the dashboard on the driver's side -2- downwards -arrow A- - ‘701919 Removing
and installing trim under instrument panel,s.
General warning notes
ATTENTION: Increased risk of accidents when removing/installing the clutch boost spring.
^
Possible risk of damage and injury (e.g. crushing).
The boost spring must be secured with a cotter pin when working near the clutch pedal (except for work on the clutch pedal switch and interlock
switch).
Technical values
Removing