911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-623001.png)
Control Module: Removal and Replacement
Removing and installing the Tiptronic control unit
Tools
Preliminary work for Tiptronic control module (also referred to generally as control unit below)
Remove right front seat.
Remove rear side trim panel on the right.
Remove right scuff plate.
General warning notes for control units
WARNING: Sudden voltage interruption of the power supply to the control module.
^
Destruction of the control module.
^
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery
charger with a current rating of at least 40 A to the vehicle battery.
^
Prior to disconnecting the control module, switch off the ignition and remove the ignition key.
Removing Tiptronic control module (also referred to generally as control unit below)
WARNING: Sudden voltage interruption of the power supply to the control module.
Destruction of the control module.
^
During programming, it is essential to guarantee the power supply for the Porsche System tester. It is essential to connect a battery
charger with a current rating of at least 40 A to the vehicle battery.
^
Prior to disconnecting the control module, switch off the ignition and remove the ignition key.
