911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-1277002.png)
Installing sensor for fluid level display
Pressing in rubber seal
1. Apply a suitable rubber lubricant (tyre mounting paste) to the sealing surface -arrows A- and press the rubber seal into the tank -arrow B- until it
is felt to engage.
Installing sensor for fluid level display
2. Apply a suitable rubber lubricant (tyre mounting paste) to the sealing surface -arrows A- and press the sensor for fluid level display into the
rubber seal -arrow B- until the sensor is felt to engage.
Subsequent work
Install tank for windscreen washer system.