911 Carrera (997) F6-3.6L (2006)
/f6-3.6l/Page-1280002.png)
Levering out the rubber seal
3. Use the removal tool, universal NR.21 to lever the rubber seal out of the tank -arrow A- and remove it -arrow B-.
Installing pump for windscreen washer system
Fitting rubber seal
1. Apply a suitable rubber lubricant (tyre mounting paste) to the sealing surface -arrows A- and press the rubber seal into the tank -arrow B- until it
is felt to engage.
Installing pump for windscreen washer system
2. Apply a suitable rubber lubricant (tyre mounting paste) to the sealing surface -arrows A- and press the pump for the windscreen washer system
into the rubber seal -arrow B- until the pump is felt to engage.
3. Connect the water pipe to the connections at the pump for the windscreen washer system -arrow C-.
Subsequent work
Install tank for windscreen washer system.
Removing and Installing Pump For Headlight Washer System
927819 Removing And Installing Pump For Headlight Washer System
Tools
Preliminary work
Remove tank for windscreen washer system.
Removing pump for headlight washer system
