911 Carrera (997) F6-3.6L (2006)
Wiper Motor: Procedures
Removing and Installing Wiper Motor
921519 Removing And Installing Wiper Motor
Preliminary work on wiper motor
Disconnect the battery and cover terminal or battery.
Left plenum chamber cover.
Removing wiper motor
1. Unscrew the fastening nut -1- for the wiper link drive and remove the drive.
Removing wiper link drive
2. Unscrew the three fastening screws -2- for the wiper motor and the fastening screw -3- for the wiper link.
Removing wiper motor in a downward direction
3. Carefully raise the wiper link and remove the wiper motor downwards.
4. Unlock the electric connector a and pull it out of the wiper motor.
Installing wiper motor
Positioning wiper motor from below
1. Carefully raise the wiper link and position the wiper motor from below.
2. Push electrical connector onto wiper motor until it is felt to engage.
3. Secure the wiper motor with the three fastening screws -2- to the wiper link.
Tightening torque 6 ftlb.