porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Cabriolet Top Control Unit - Revised|Page 4555 > < Cabriolet Top Control Unit - Revised|Page 4553
Page 4
background image

11.1 - In the vehicle owners manual find the section...." Electrical Operation of Top". Locate the text....." 1. Turn ignition key to ignition lock position

1". Strike out this text with a solid line through the center. At this location in the owner's manual, note the following:

Cabrio top operation changed. Refer to the new information in the front of the owners manual.

11.2 - The abbreviated operating instructions found on page 8 of this bulletin are to be copied, cut down to the correct size, and placed on the back side

of the driver's sun visor over the old information.

12 -

Discuss the new operating instructions directly with the vehicle owner. Show the customer where the new information can be found in the vehicle
and demonstrate the Cabrio top operation.

Labor Information: 210 TU

For the 911 Carrera 2/4 and 911 Turbo M.Y. 1990 through 1994:

Parts information:

The additional parts will be required when installing the 993 618 313 00 control unit into the 911 Carrera 2/4 or 911 Turbo MY. 1990 through 1994:

Work Procedure 1 - 8.1

1

-

Move the drivers seat to the rear most position. Note the radio code and disconnect the battery negative clamp.

Cabriolet Top Control Unit - Revised|Page 4555 > < Cabriolet Top Control Unit - Revised|Page 4553