911 Carrera 2 Coupe F6-3600cc 3.6L SOHC (1990)
Engine Temperature Sensor: Service and Repair
1.
Remove heated air elbow.
2.
Remove speed/reference/temp II sensor connector retainer.
3.
Disconnect the temp II electrical connector.
4.
Remove wire and cover grommets near engine speed and reference sensors.
5.
Pull speed/reference sensor wires out of grommet.
6.
Remove temperature sensor from engine.
7.
Reverse procedure to install, applying a light coat of high temperature anti-seize compound (i.e. MolyKote HTP).