911 Carrera 2 Coupe F6-3600cc 3.6L SOHC (1990)
wheel carrier.
Lubricate threads of mounting bolts for locking plate (19 in Figure 2) with Optimoly HT, PN 000 043 004 00.
Tightening torque:
37 N-m (27 ft.lbs.).
Wheel carrier/spring strut mounting. Washer and nut (6 and 7 in Figure 2) must be clean and free of grease.
Lubricate bolt threads approximately 10 mm and bolt head bearing surface (5 in Figures 1 and 2) with
Optimoly HT.
Tightening torque:
135 N-m (100 ft.lbs.).
Check and adjust front wheel camber and toe after installing wheel carrier.