porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Cellular Phone (Fujitsu) - Installation|Page 4351 > < Glove Box Lamp Switch - Unintentional Alarm Activation
Page 1
background image

Technical Service Bulletin # 99301

Date: 930114

Cellular Phone (Fujitsu) - Installation

Group
9

Number
9301

Model
911

Part Identifier
6911

January 14, 1993

Subject:
Fujitsu Cellular Phone Installation

ATTENTION:
Service Manager/Service Technician

Models Affected:
911 Carrera and Turbo M.Y. 1987-89 
911 C2/C4/T from 1989

Concern:
The following information contains service installation instructions for the Porsche Fujitsu Cellular Phone into the above listed Porsche 911 models. This
installation positions the phone, phone holder and extension speaker in one unit to the right side of the original center console.

General Information:

The Porsche Fujitsu Cellular Phone has been designed for easy installation into Porsche 911 models from M.Y. 1987. Please read the installation
instructions before starting work on the car In vehicles with radios requiring the use of a theft code, make note of the code for use after installation of the
radio.

Use protective coverings over the vehicle seats, floor carpets and painted body parts. Before starting the installation of the Porsche Fujitsu Cellular
Phone, check all vehicle functions. Verify that everything is working.

Warranty Information:
See applicable Warranty Bulletins.

Work Procedure

Radio removal

1.

Remove radio trim plates (where applicable)

Cellular Phone (Fujitsu) - Installation|Page 4351 > < Glove Box Lamp Switch - Unintentional Alarm Activation