911 Carrera 2 Targa F6-3600cc 3.6L SOHC (1992)
Oxygen Sensor: Service and Repair
Fig. 54 Oxygen Sensor
OXYGEN SENSOR REPLACEMENT
When replacing oxygen sensor, always use the following precautions:
^
Be sure threads are free of damage, burrs, and carbon deposits.
^
Be careful not to damage pigtail wires when removing or installing sensor.
^
Be sure threads are coated with high temperature anti-seize compound (carefully coat threads so as not to contaminate inside sensor surfaces.
^
Install and tighten to specified torque (49-57 Nm / 36-43 ft.lbs.).
^
Make sure harness connection is clean and tight.