911 Carrera 2 Targa F6-3600cc 3.6L SOHC (1992)
2. Fit threaded sleeve. Place threaded sleeve (C) up to the stop onto the plug lead. Place plug lead along with threaded sleeve into stop pliers. Connect
wire to threaded sleeve by pressing the stop pliers until they disengage by themselves. Fit strain relief clamp by crimping the threaded sleeve in the
stop pliers, making sure the pliers profile is flush with the end of the threaded sleeve on the plug lead side.
FITTING
1. Apply sliding compound (G) to plug lead (A) or plug connector (8)
2. Connect plug lead to plug. Place plug lead into assembly tool (8), place into plug connector connector and screw in place. Push plug connector onto
spark plug