911 Carrera 2 Targa F6-3600cc 3.6L SOHC (1992)
Vibration Damper: Technical Service Bulletins
Brake Vibration Damper - New Application Information
Group
4
Number
9310
Model
All
Part Identifier
4745
August 5, 1993
Subject:
Brake Vibration Damper Application
ATTENTION:
Service Manager / Service Technician
This bulletin replaces Technical Bulletin Group 4, Number 9204, Book I, pages 95-98.
Models Affected:
968 from Model Year '92 (N)
944 S2, 944 Turbo from Model Year '87 (H)
911 Carrera 2 and 911 Carrera 4
from Model Year '89 (K)
911 Turbo from Model Year '91 (M)
928 S4, 928 GT from Model Year '88 (J)
928 GTS
Concern:
Application of vibration dampers and damping plates.
Vehicle Information:
A new version damping plate with steel clip (formerly plastic clip) is installed on 911 Carrera 2/4 rear axle from production date: April 2, 1991.
VIN:
96_MS 41 1418 Coupe
96_MS 44 0719 Targa
96_MS 46 2026 Cabriolet
928 S4/GT rear axle from production date: April 12, 1991
VIN: 92_MS 81 0362
Use only new version damping plates when replacing damping plates on 911 C2/4 all Model Years and 928 S4/GT from Model Year '88 (J).
Refer to application chart for part numbers.
Carrera 2 Only
Rear brake calipers with shorter pistons were installed during production from VIN:
96_LS 45 1 922 up to 96_LS 45 2002 Coupe
96_LS46 0623 up to 96_LS 46 0662 Targa
96_LS47 1544 up to 96_LS 47 1780 Cabriolet