911 Carrera 2 Targa F6-3600cc 3.6L SOHC (1992)
Legend 3
-
Refer to images for instructions and legends.
Disassembly
-
Mount retaining plate 9177 in a vice, fit input shaft and undo collar nut with Special Tool 9105.
-
Use a suitable tool (e.g. Kukko 17 - 1) to press all parts off the input shaft over the 2nd gear wheel.
1 = Selector sleeve
2 = Driver dog
3 = Guide sleeve
4 = Punch mark
5 = Assembly position
Assembly
-
Observe assembly position of selector sleeve. When assembling, the punch mark must be centered in relation to the driver dogs.
Assembly dimension (new) = 0.9 mm min.
Wear limit = 0.6 to 0.7 mm