911 Carrera 4 (996) F6-3.6L (2004)
/f6-3.6l/Page-1177004.png)
3. To ensure that the function of the headlight beam adjustment is not impaired, the cable -C- of the plug must always point towards the exterior of
the vehicle.
4. Put the cap -1- of the headlight in position and press down until both releases -B- engage. Screw in both screws -A-. Tightening torque: 4 Nm (3
ftlb.).
5. Install main headlight and perform a function test.
Removing and Installing Halogen Bulb As From Model Year '02
Removing And Installing Halogen Bulb As From Model Year '02
Removing halogen bulb
1. Switch off light. Remove main headlight
2. Actuate both locking tabs on the cap -arrow- and remove the cap.
