911 Carrera 4 (997) F6-3.6L (2007)
/f6-3.6l/Page-177001.png)
Camshaft: Service and Repair
Removing and Installing Actuator For Inlet Camshaft
Removing and installing actuator for inlet camshaft
Removing actuator - camshaft removed
Information
^
During assembly and disassembly, absolute cleanliness is essential!
^
The identification on the bearing sleeve should point towards the camshaft (see illustration).
Component overview of inlet camshaft
Inlet camshaft
1. Unscrew central screw -1- with adapter -2-.
2. Remove camshaft adjustment device -3-.